IMS Micro Cutter Comfort

IMS Micro Cutter Comfort

CUTTING ROBOT Ø 80 – 250 MM / 3’’- 10’’

Your advantages at one glance

• large range of application in pipes from DN 80 to 150 / 3 up to 6“ (inside diameter),
optional until DN 250 / 10“
• excellent flexibility in bends up to 90° in DN 100 / 4“ through rotating and swivel head
• high work efficiency due to axial feed of approx. 100 mm / 4“
• usage also in difficult pipe situations due to creep and climbing function
• pneumatic clamping unit permits use also in vertical pipes
• only very small access openings required
• convenient media supply package of 30 m / 98,40 ft
• extremely high cutting force through powerful air motor
• flexible operation through remote control via cable and removable monitor
• very precise control of cutter through joystick
• permanent monitoring of cutting operation due to colour camera with air/water cleaning
• great mobility convenience through compact chassis
• damage prevention through automatic monitoring of internal pressure with signalling
• deep pipe insertion by pipe eel possible
• variable cutting tools can be installed
• minimum downtimes in case of repair through operator-replaceable components or use of express service (see detailed description in the offer/order conditions)

Equipment features / functions and technical details

• useable from DN 80 to 150 / 3 up to 6“ (inside diameter), up to DN 250 / 10“ with optional extension
• flexibility in bends 90° from DN 100 / 4“ (clay, no folds, or similar)
• axial feed approx. 100 mm / 4“, creeping and climbing function
• 30 m / 98,40 ft media hose on drum
• coupling elements for pipe eel
• 400° rotating and approx. 90° swivel movement with stops
• air-powered cutter motor
• colour camera with LED
• camera cleaning with permanent air and water on demand (Switch)
• splashproof according to IP 54
• waterproof device with 0.8 bar nitrogen filling
• permanent monitoring of internal pressure with signalling
• remote control with joystick for rotation (sensitivity adjustable) and swivelling, controller for light, switch for water, cutting engine and each bubble
• 3,5” TFT LCD Monitor, storage picture/video (JPEG/MPEG) with SD card, USB, date and time display on demand
• outside diameter of cutter: 72 mm, overall dimensions: 600 x 600 x 920 mm (L x W x H)
• weight: approx. 55 kg
• compact assembly of cutter on chassis with pneumatic and electrical rotary leadthrough
• detachable individual components
• box with job site tools, nitrogen filling adapter, set of replacement screws, 1 cutting tool carbide, manual, over view spare parts

Requirements of usage

Power supply: 100 – 240 VAC, 50/60 Hz, max. 1,6 A

Compressed air requirements:

clean (particles < 5 micron),
temperature range 5 °C until max. 40 °C / 41 °F until max. 104 °F,
rest water separated, rest oil < 5 mg/m3,
pressure air supply max. 10 bar / 145 PSI,
min. volume 1 m3/min / 35 CFM
Cutting tools: Original IMS cutting tools are recommended

Inside pressure monitoring: nitrogen refilling equipment essentially required

Category: Robotic Cutting

Ask us for more info!

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message

    Comments are closed.

    OC Mechanical Services