Shop

Drain Cleaning

K-1500G Sectional Machine

K-1500G Sectional Machine Image

For 2″ (50 mm) to 10″ (250 mm) Drain/Sewer Lines

• A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control.

– Pull down on the handle and the cable spins at 600 RPM.
– Release handle, cable stops instantly.

• Comes equipped to use 11⁄4″ (32 mm) cable to clean 3″ (75 mm) to 10″ (250 mm) lines through 300 feet (92 m).
• 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
• Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
• Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.

Machine Dimensions:

Width Wheel to Wheel: 26″ (66 cm)
Length Including Kickstand: 28″ (71 cm)
Ground to Top of Handle: 38″ (97 cm)
Back of Handle to Front: 49″ (124 cm)
Ground to Top of Housing Shell: 27″ (69 cm)

A-17 Manhole Guide Pipe Adjusts 7′ (2,1 m) to 12′ (3,7 m) supports cables, locks into place quickly.

Category:
Sectional Machines
Sub-Category:

Ask us for more info!

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message

    K-1500G Sectional Machine

    K-1500G Sectional Machine Image

    For 2″ (50 mm) to 10″ (250 mm) Drain/Sewer Lines

    • A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
    • Unique, easy-to-use, instant-acting cable clutch maximizes operator control.

    – Pull down on the handle and the cable spins at 600 RPM.
    – Release handle, cable stops instantly.

    • Comes equipped to use 11⁄4″ (32 mm) cable to clean 3″ (75 mm) to 10″ (250 mm) lines through 300 feet (92 m).
    • 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
    • Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
    • Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.

    Machine Dimensions:

    Width Wheel to Wheel: 26″ (66 cm)
    Length Including Kickstand: 28″ (71 cm)
    Ground to Top of Handle: 38″ (97 cm)
    Back of Handle to Front: 49″ (124 cm)
    Ground to Top of Housing Shell: 27″ (69 cm)

    A-17 Manhole Guide Pipe Adjusts 7′ (2,1 m) to 12′ (3,7 m) supports cables, locks into place quickly.

    OC Mechanical Services